https://mustloveboats.com/2023/04/27/pss-shaft-seal-bellows-compression-made-easy/https://mustloveboats.com/wp-content/uploads/2023/04/24d88865-0945-42a1-893a-d9eaeb261224_1_105_c.jpeg24d88865-0945-42a1-893a-d9eaeb261224_1_105_c2023-04-27T19:47:17+00:00monthlyhttps://mustloveboats.com/2014/07/27/below-decks-autopilot-install-diy-part-5-of-many/https://mustloveboats.com/wp-content/uploads/2014/07/img_2306.jpgIMG_2306https://mustloveboats.com/wp-content/uploads/2014/07/img_2304.jpgIMG_2304https://mustloveboats.com/wp-content/uploads/2014/07/img_2302.jpgIMG_2302Sensor and stand being put on the base. The sensor can be easily removed for service.https://mustloveboats.com/wp-content/uploads/2014/07/img_2301.jpgIMG_2301Rudder position sensor mount fabricated from plywood and epoxy.2017-02-26T01:20:19+00:00monthlyhttps://mustloveboats.com/2014/03/24/below-decks-autopilot-diy-part-4-of-many/https://mustloveboats.com/wp-content/uploads/2014/03/img_22291.jpgIMG_2229https://mustloveboats.com/wp-content/uploads/2014/03/img_2222.jpgIMG_2222https://mustloveboats.com/wp-content/uploads/2014/03/img_2226.jpgIMG_22262017-02-26T01:18:34+00:00monthlyhttps://mustloveboats.com/2014/03/04/below-decks-autopilot-diy-part-2-of-many/https://mustloveboats.com/wp-content/uploads/2014/03/img_2199.jpgIMG_2199Platform bonded to hull plus 4 #10 screws into stringer. More tabbing coming soonhttps://mustloveboats.com/wp-content/uploads/2014/03/img_2197.jpgIMG_2197Mini string epoxied in with first layer of tabbinghttps://mustloveboats.com/wp-content/uploads/2014/03/img_2196.jpgIMG_2196Stripping paint and roughing up the glass. Using a vacuum to minimize dust in the boat.https://mustloveboats.com/wp-content/uploads/2014/03/img_2190.jpgIMG_2190Trying to keep the drive mid-extension for final dry fitting.https://mustloveboats.com/wp-content/uploads/2014/03/img_2186.jpgIMG_2186Dry fitting everythinghttps://mustloveboats.com/wp-content/uploads/2014/03/img_2150.jpgIMG_2150https://mustloveboats.com/wp-content/uploads/2014/03/img_2149.jpgIMG_2149https://mustloveboats.com/wp-content/uploads/2014/03/img_2120.jpgIMG_2120Raymarine Type 1 in the boxhttps://mustloveboats.com/wp-content/uploads/2014/03/img_2143.jpgIMG_2143Test fit over the top of the rudder shaft. Should be perfectly snug2017-02-26T01:18:08+00:00monthlyhttps://mustloveboats.com/2014/03/13/below-decks-autopilot-diy-part-3-of-many/2017-02-26T01:17:47+00:00monthlyhttps://mustloveboats.com/2014/02/24/below-decks-autopilot-diy-part-1-of-many/https://mustloveboats.com/wp-content/uploads/2014/02/photo-5.jpgMarking Locationshttps://mustloveboats.com/wp-content/uploads/2014/02/photo-4.jpgMeasuringhttps://mustloveboats.com/wp-content/uploads/2014/02/photo-2.jpgEdson Tiller ArmOne fine piece of bronzehttps://mustloveboats.com/wp-content/uploads/2014/02/photo-3.jpgTest fit arm on shafthttps://mustloveboats.com/wp-content/uploads/2014/02/photo-1.jpgType 1 Linear Drive2017-02-26T01:15:39+00:00monthlyhttps://mustloveboats.com/autopilot-install-diy/2017-02-26T01:14:27+00:00weekly0.6https://mustloveboats.com/2016/05/21/autopilot-install-finish/https://mustloveboats.com/wp-content/uploads/2016/05/img_2232-1.jpgIMG_2232 (1)https://mustloveboats.com/wp-content/uploads/2016/05/img_3372.jpgIMG_3372https://mustloveboats.com/wp-content/uploads/2016/05/img_3369.jpgIMG_3369https://mustloveboats.com/wp-content/uploads/2016/05/img_3368.jpgIMG_3368https://mustloveboats.com/wp-content/uploads/2016/05/img_3424.jpgIMG_3424https://mustloveboats.com/wp-content/uploads/2016/05/img_3379.jpgIMG_3379https://mustloveboats.com/wp-content/uploads/2016/05/img_3377.jpgIMG_3377https://mustloveboats.com/wp-content/uploads/2016/05/img_3426.jpgIMG_3426https://mustloveboats.com/wp-content/uploads/2016/05/img_3425.jpgIMG_34252017-05-16T21:12:59+00:00monthlyhttps://mustloveboats.com/2014/07/29/sabre-36-shower-support-and-cabin-sole-repair-part-2/https://mustloveboats.com/wp-content/uploads/2014/07/img_2055.jpgIMG_2055https://mustloveboats.com/wp-content/uploads/2014/07/img_2054.jpgIMG_2054Patch installed. Edges were sealed with two coats of epoxy.2014-07-29T02:08:30+00:00monthlyhttps://mustloveboats.com/diy-projects/2015-06-02T15:55:06+00:00weekly0.6https://mustloveboats.com/2014/03/20/wash-your-lines/https://mustloveboats.com/wp-content/uploads/2014/03/img_2296.jpgIMG_2296https://mustloveboats.com/wp-content/uploads/2014/03/img_2294.jpgIMG_2294Before2014-03-20T00:48:02+00:00monthlyhttps://mustloveboats.com/2014/03/18/sabre-36-shower-support-and-cabin-sole-repair-part-1/https://mustloveboats.com/wp-content/uploads/2014/03/img_2049.jpgIMG_20492014-03-19T17:06:56+00:00monthlyhttps://mustloveboats.com/2014/03/02/working-on-the-boat-in-the-new-england-winter/2014-03-18T00:36:38+00:00monthlyhttps://mustloveboats.com/2014/03/17/at-dawn-on-the-sea/https://mustloveboats.com/wp-content/uploads/2014/03/dsc_0365.jpgDSC_0365https://mustloveboats.com/wp-content/uploads/2014/03/wp_001243.jpgWP_001243https://mustloveboats.com/wp-content/uploads/2014/03/wp_001260.jpgWP_001260https://mustloveboats.com/wp-content/uploads/2014/03/5400_97051036148_5114534_n.jpg5400_97051036148_5114534_n2014-03-17T18:04:23+00:00monthlyhttps://mustloveboats.com/about/2014-07-18T16:46:08+00:00weekly0.6https://mustloveboats.com/2014/03/04/sabre-sailboat-yahoo-group/2014-03-04T18:28:26+00:00monthlyhttps://mustloveboats.com/2014/02/23/welcome/2014-02-23T03:33:16+00:00monthlyhttps://mustloveboats.comdaily1.02023-04-27T19:47:17+00:00